Install a Two Handle Kitchen Faucet

How to Install a Two Handle Kitchen Faucet

A significant number of people use kitchen faucet to their kitchen. So it is essential to know how to install a two handle kitchen faucet perfectly.

Few people have the knowledge about the kitchen fixtures. Sometimes a little assistance can go far and some of the time, potentially until the end of time. 

In this blog, I am going to discuss on how to install a kitchen faucet. It is really a simple task if taken with a serious eye.

How to Install a Two Handle Kitchen Faucet?

There are various types of faucets available in the market. They have different colours, shapes, and styles.

Due to this versatility, one can easily get confused while selecting the best kitchen faucet. Some faucets are very easy to install if the guidelines are clear to understand.

Moreover, you can keep an eye on the best kitchen faucet brands, so that you can choose the faucet that is easy to install.

As a result, a newbie can install the faucet without any trouble. With regards to installing a two handle kitchen faucet, we should consider the safety first.

We should be careful when we do the installation work. The kitchen is a significant room in the house, so we must deal with the work carefully. 

Things Needed to Install a Kitchen Faucet

  • A double handle faucet
  • The perfect measure of plumber’s putty
  • Teflon tapes
  • Plumber’s wrench
  • Flashlight

Step:1

At first, ensure that the model of the faucet is the one that you have selected to buy fits through the sinkholes. Also, check that all the parts are included in the pack that is required for installation.

Step:2 

Appending the faucet will require either a gasket or a ring of plumber’s putty to work as a glue between the valves, spout assembly and the countertop.

The gasket is normally made out of elastic. If the manufacturer didn’t provide the gasket, you would need to purchase it from the store. 

Apply a decent amount of plumber’s putty in the groove of the putty plate. It would be installed from before.

Step:3 

Include both the hot and cold faucet spouts in the sink. Most manufacturers will provide the riser top with the spout that is pre-installed.

Adjust them perfectly with the sinkhole. Ensure that the adjustment is done accurately to avoid the hindrances during the following steps.

Step:4 

Place the hot and cold faucet valves through the holes in the countertop. You should keep the cold faucet in the right and hot in the left.

If the valves have riser tubes which are pre-installed, embed them through the countertop holes. Reach below the sink with one hand, then tighten the bolts which hold the faucets down.

Some faucets have big sized washers as well as nuts which screw the valve tailpieces. Despite the fact that others are placed perfectly with brackets that fastener to the underside of the valve body. 

Step:5 

Reach down from under the sink, join the stretchable hoses from the hot and cold valves with the spout.

Then attach the riser tubes from the hot and cold valves to the top valves, that are placed on the wall. To ensure no leakage, it is needed to test it out at this stage.

Just try to install the washer as indicated by the manufacturer’s guideline. Perform the task properly and make sure no accidents happen in the future while using the faucet. Check over the sink to ensure that the deck plate and faucet are adjusted.

Step:6

Eliminate additional plumber’s putty from around the faucet base utilizing a putty remover. After that wipe it down with a wet material. Wrap Teflon tape at the end of the hot and cold water supply lines. Connect supply line to the right faucet pipes and tighten them strongly.

Step:7 

To wash any kind of trash down eliminate the screen that is as of now on the spout. Then run some water through the faucet until no observable garbage is left in the line of the sink. When the water begins to run clear the aerator screen.

Watch This Short Video on Installing a Two Handle Kitchen Faucet

Here is a short video so that you can fully understand how to install a kitchen faucet perfectly.

Conclusion

When you need emergency service to install your kitchen faucet, you may not always find a plumber or professional assistance.

So you need to acquire some skills that will help you in the emergency time. Moreover, installing a kitchen faucet is one of the most important tasks of the kitchen that we can’t ignore.

The kitchen is considered the heart of a home and the heart should consistently be taken care of if something has gone wrong.

Hope my simple guideline of installing a kitchen faucet will help you a lot in the future.

Leave a Comment